Archive for the ‘Internet Security’ Category
How to Reduce the Threat of Computer Viruses
Almost all personal computers and business hardware has anti-virus software as a way to keep viruses and other malware sources at bay. The reason is simple: it’s easy to install, easy to update, and easy to use.
However, in the business world, just installing the anti-virus software isn’t enough. In order to keep your data secure and your client information confidential, you must follow up to ensure that the software is being used to its maximum potential.
-
Regularly update all of your software – even ones that aren’t related to information security in any way. Viruses are usually developed to get into operating systems and programs that are outdated or otherwise weak. When a software update is offered, it’s usually because the programmers have found a way to make it more secure (and usually easier to run, too).
-
Keep an eye on your employees. Although it isn’t always deliberate, the number one cause of viruses on work computers is employees who accessed unsafe sites or opened an email they shouldn’t have. Whether you need to restrict Internet access, train employees on Internet safety, or instill a new policy into your company manual regarding computer use and viruses, you should always make sure your staff knows the rules regarding viruses and information security.
-
Put up protection behind the protection. No matter what business you’re in, anti-virus software simply isn’t enough. Your company’s reputation and your customers’ safety is dependent on your network being a safe, secure place that keeps viruses and other sources away from sensitive information. Sometimes, this means hiring an IT vulnerability manager to help you overhaul your entire network, and other times it means taking steps to improve policy management.
When it comes to viruses and other types of malware, IT solutions don’t always have to be complicated. Sometimes, it’s the small steps (anti-virus software, employee training, limited Internet use) that can have the biggest impact on your information safety measures.
Five Disaster Recovery Planning Tips
If your business is getting ready to set up or install an IT disaster recovery plan, make sure you cover all the bases. Few companies are able to fully recovery from the loss of data or significant downtime, so this is one type of safety net you simply can’t do without.
- Monitor and/or update your disaster recovery plan regularly. The business world and the Internet are both like living, breathing organisms – they change and adapt daily. This means that a disaster recovery plan put in place six months ago might very well be obsolete by the time the unthinkable occurs. Whether you rely on automated monitoring, regular back-up data storage, or an actual physical update of your system, it’s a good idea to include regular updates into your planning and your recovery budget.
- Test the system regularly. Although this is technically part of the monitoring step, it’s a step that 9 out of 10 companies fail to do. But if there are weaknesses in your disaster recovery plan, you might actually be worse off than if you had no plan at all. That’s because you and your team will go through your recovery efforts under the assumption that you were safe from the more pressing issues, and you might fail to perform the most basic - and necessary - steps.
- Keep data stored somewhere else. Whether you keep your backed-up data stored physically off-site or you use offshore storage for all your information needs, having the information away from your own system is the most important thing. This back-up data will need to be updated regularly, according to your recovery point objective (or how reliant your business is on having the most recent data possible).
- Protect the hardware that goes home. If you have laptops that employees take home for work use, you need to install the laptops with theft recovery and data delete options. The top-of-the-line options will be able to return all the necessary information to you and still disable the computer so that the thief can’t get access to the same data.
- Consider hiring someone to do the disaster recovery planning for you. Whether you are a small business without an IT department or a large business whose data planning needs span entire departments and cross-country facilities, this is one area where it doesn’t pay to cut corners.
Information Technology: Why Hire a Third Party
As more and more people become computer-savvy and companies open up IT departments to handle information and technology needs, the idea of hiring a third party may seem like an expense you simply don’t need. However, there are benefits to a third party IT professional beyond the obvious.
Vulnerability programs can slow your system down. Your employees and customers need to use your network every day in order to make purchases and get the job done. Vulnerability assessments and security scans can take up some of that precious bandwidth and make your system slow down. A third party IT firm can run their programs during non-office hours without placing a burden on your employees.
When it comes to knowledge, sharing is key. One of the primary benefits of an IT firm is that the professionals have worked with dozens of firms in the same industry as yours. While a reputable firm would never share sensitive information, they may have insight into best practices and new technologies that may or may not have worked for another company.
Distance provides clarity. In the bustle of day-to-day activities, an on-site IT department or professional might prioritize tasks according to a skewed system. After all, your employees have their own to-do lists and tasks to be completed, and they may not have the “bigger picture” in mind. When you work with an outside IT firm, you can create your own list of priorities and act accordingly. This will ensure that the most important (and foundation-building) tasks get done first.
It doesn’t matter whether your company is considering information technology risks for the first time or if you’ve been in the business of IT safety for years; looking for a third party IT provider is a great step. Save time, save money, and save the headache of IT disasters to come by outsourcing all your IT needs.
Financial Institutions and Vulnerability Management
If you’re in the business of money, vulnerability management should be on your list of priorities. In addition to security risks that change as often as the market, there are also considerations in federal regulations regarding customer data safety, as well.
There are a number of components of a good vulnerability management plan, including everything from finding weaknesses to making sure employee compliance is at its height. Some of the major components include:
-
Policies and Procedures: How does your company define rights and responsibilities for employee device use, user identity, and server access? How accessible and enforced is this information?
-
Baseline and Assessment: Where are your biggest weaknesses – in the system or in employee use? Have you run a vulnerability assessment, and what are the findings?
-
Priorities: Now that you know where your vulnerabilities lie, how important are they? What needs to be addressed immediately, and what can be put off until the budget allows?
-
Solutions: Most companies fail the biggest in this category of vulnerability management: follow-through. Knowing where your weaknesses lie will only help you strengthen your infrastructure if you do something about them.
-
Regular Maintenance: For financial institutions, this step is key. Information regulations are always changing, and in order to avoid liability and maintain a good name in the industry, you have to put data security at the top of your list.
It doesn’t matter whether you’re in the market for a vulnerability management review or if you’re considering it for the first time - you can benefit from the services of an IT consulting firm that specializes in your industry.
Vulnerability Metrics, Simplified
In its most basic form, vulnerability metrics is a set of values assigned to networks and applications. However, in order to use it to prevent an IT disaster, you need to know how to use those metrics effectively. Vulnerability metrics are best used when applied to determine how at risk a business is from a network threat as well as how great of an impact that threat will be.
Imagine the following scenario:
You suspect theft from within your company. What kind of measures would you take to catch the thief, prevent it from happening again, and regain whatever it is that has been affected? What actvities can be set aside while you focus on this task, and what simply cannot be sacrificed at this time?
Vulnerability metrics is basically the network of professionals behind the hero in an action-packed thriller movie. While the hero is responsible for going out there and getting things done, he can’t do it without someone he trusts processing his information, warning him of risks, and providing a sounding board for making the right decisions.
In the same way, without the metrics allowing you to compare and identify your most important threats, you not only leave your network exposed and defenseless, but it will be difficult to recuperate from the threat and you would not know how to prevent it from happening again. After all, you have to keep that hero alive and working.
There is a weakness to every organization, it is finding it and controlling it that is the true task. Once you are aware of your company’s weakness, you can understand the affects of it and learn how to prevent it.
Though it is easy to obtain vulnerability metrics, implementing them is a harder task if you are not properly trained. A well-qualified employee or an IT consultant has been trained to use the metrics system specifically for your business and your bottom line. With the correct training, vulnerability metrics can be an essential service in protection your business.
Understanding Security Breaches
An important part of a disaster recovery system is preparing for security breaches. A security breach is any intentional act on a network of any kind. Even though a company might survive a breach and successfully retrieve its ‘stolen’ information, the biggest problem of the entire disaster is that this information is no longer secure. In this case, the use of recovery tools is simply not enough to regain client’s trust - or even meet all federal guidelines.
This incident is similar to that of identity theft. The results can be disastrous to an individual regarding credit, stolen money, and the hassle of resolving it all. The same goes for a company. If this situation were to occur, a company’s reputation would be on the line as well as the threat of their security system.
So, how can you prevent this from happening again? How can you recover from the damage?
In order to secure companies after a major disaster like this, it’s best to first secure the software and hardware of the network. Make certain that all non-vulnerable areas (such as firewalls and verification servers) are secure. Secondly, make certain to involve an IT specialist. Although you are dealing with machinery and technology, specialized human monitoring could be the key to preventing these disasters from occuring again.
At the end of the day, the most important part of a company is its INFORMATION. That is the answer, nothing else. Without it there would be no profit, no clientele, no business. We use technology to protect technology but that is simply not enough. Without the proper specialist to operate the security system, resources are vulnerable and recovery tools are useless.
How to Outsmart Hackers
Hackers are a form of intelligent disease geared toward businesses. When it comes to IT infrastructure, the only way to outsmart hackers is to think like them. This is vital information to keep in mind while developing an IT team. Hackers may use any aspect of business vulnerability in order to gain a connection to the desired information. Social engineering is also a key method for these threatening individuals because of the information that they can potentially obtain.
If an IT team successfully secures a company’s system, than breaching into that network becomes more difficult for a hacker; unfortunately, these individuals are specialized in manipulating people to get the information they want. This is known as social engineering.
Techniques of social engineering to be aware of are:
- Smooth-talking or flattering potential information holders
- Suspiciously gaining trust
- Manipulating employees to learn information on system operations
- Impersonating authoritative personnel via phone or e-mail
Though these are difficult traits to identify, suspicious individuals asking for access to e-mail accounts or password changes (or any other task that should be operated by a system administrator) should be taken into consideration as a potential hacker. Simple solutions toward avoiding hackers include educating employees about hackers and their methods, securing private information by informing only qualified personnel, and implementing procedures for password protection that ensures no outside party gains access to it.
If employees are not properly trained to avoid a violation from a hacker, than the company becomes more vulnerable to these threatening individuals. Thinking like a hacker can result in keeping your business vulnerable and securing its most vital information.
Getting to Know Guidance Consulting
It’s impossible to offer tips, advice, and information on the field of IT for too long without eventually feeling the need to make a formal introduction. That’s especially true for us here at Guidance Consulting, since our primary focus is on creating the kind of relationships that allow for collaboration and a true team environment.
So without further ado, we’d like to introduce you to our company and what we do.
The industry of information technology is growing rapidly throughout the professional world. Though this seems fit for most businesses, Guidance Consulting has abundant services that assist every type of business. Rather than the common technology queries and renovations, Guidance Consulting implements solutions that increase productivity.
Aside from the basic needs of IT, Guidance Consulting focuses on keeping a successful clientele doing what it is they do best by establishing network safety and providing them with professional growth. These businesses in turn earn the ability to expand in this growing IT environment and successfully become industrial leaders.
Among these services offered are:
- Information Security Consulting
- Enterprise System Monitoring
- Contract Recruiting
- Technology Staffing Solutions
- Information Technology Outsourcing
The purpose of Guidance Consulting is to secure the safety of companies in order for them the keep their hard earned reputation. After all, a disaster in any area of life may occur at any time. We, as individuals, prepare for them by providing ourselves with medical insurance and practicing safety precautions. Businesses should be given the same protection as their downfall may be catastrophic, as well.
In order to introduce clients to efficient business tactics, Guidance Consulting provides all of these services and grants companies stabilization, progression, and expansion toward achieving all of their professional goals.
Information Security: When All the Planning in the World Isn’t Enough
No matter how proactive you are about your information security needs or how many walls of protection you have up against attackers, there will always be a level of threat. That’s because one of the biggest reasons hackers and malware are able to exploit so many businesses is that they make it a point to find new, innovative ways into even the most secure systems. Whether they’re doing it for the challenge or to exploit businesses known for their great security, the outcome is that all companies are in danger of being infiltrated by methods even the best IT professionals have never even considered.
Consider the following scenario:
A company does everything in its power to maintain a cutting-edge vulnerability management plan. Their IT department runs regular scans, patches the necessary holes, and does and annual overhaul of the entire system. They comply with all regulations for information security and have a great national reputation. However, a previously unknown weakness is exploited by a hacker, and all of their client information is now in the hands of identity thieves.
The problem with this scenario is not a lack of planning – the company did everything within its legal responsibilities to keep their system secure. However, what they didn’t do was prepare for zero-day exploits, which are those pesky new ways in that hackers and malware discover while you’re busy running your business.
That’s why the best vulnerability management plans are those that take zero-day exploits into account. By increasing the level of system monitoring and putting an emergency plan in place, you can minimize the damages that may occur when this sort of attack occurs. Businesses can also create a security infrastructure that makes it difficult for attackers to navigate the system or find the information they’re looking for once they are inside.
Because this kind of security planning can be more complicated and in-depth than what your IT staff is accustomed to (or able to fit into the workday), IT consultants are a great option. Not only can you put your security in the hands of someone whose sole job it is to protect your company, but you’re hiring a group of professionals who make it their priority to know what’s coming next on the hacking horizon.
Tech Tip: Upgrade Your Policies and Procedures
So much about vulnerability management has to do with technology. From the hardware and software you use to the communications tools you rely on for remote employees, most information security measures address what you can do to make the technology safer. That’s why so many businesses rely on their IT departments and IT consultants to help them create and maintain their systems.
However, there is another aspect to vulnerability management that has little to do with the equipment you use: policy and procedure management. Considered the real “business” side of running a business, the policies and procedures you present to your employees are the backbone of your company. Your policies and procedures determine a standard for activity, morality, and business practices. They also provide a written resource for use across the board.
That’s why any good vulnerability management plan will include a look at your IT policies and procedures. When done correctly, this means you will address:
- Employee rights and responsibilities
- Data confidentiality issues
- Personal computer best practices
- Routine maintenance and repair
- Workstation configuration
- Risk management
- Security procedures
- Damage control
Putting these types of issues into writing and integrating them into company policy means that you have an additional layer of protection – especially when it comes to legal issues arising from federal information security standards.
After all, you can’t watch all your employees all the time, but by enforcing a general standard company-wide, you can ensure that you’re doing your best to cover all your bases when it comes to information security.